h2 Lc Dallara 8.3125
|
Raw only
$225 |
h2 Wave 9.1
|
OUT OF STOCK
|
h2 Gumeshoe 9.1
|
OUT OF STOCK
|
h2 Teth 9.1
|
OUT OF STOCK
|
NOTE
*When using a Hybrid rail on an AGD Emag the solenoid plunger must be readjusted.
AGD Stock length is 3.005" - 3.010"
Hybrid Rail (H1) is 2.9336" - 2.9386"
H2 Hybrid Rail is 2.9678" - 2.9728"
**The Nummech frames don't have enough clearance for the sear on Hybrid (H1) and Automag rails so modifications to the sear and maybe the grip will be necessary when paired together.
***H2 rails work without modification on the Neummech frame
*When using a Hybrid rail on an AGD Emag the solenoid plunger must be readjusted.
AGD Stock length is 3.005" - 3.010"
Hybrid Rail (H1) is 2.9336" - 2.9386"
H2 Hybrid Rail is 2.9678" - 2.9728"
**The Nummech frames don't have enough clearance for the sear on Hybrid (H1) and Automag rails so modifications to the sear and maybe the grip will be necessary when paired together.
***H2 rails work without modification on the Neummech frame
|
All h2 rails require a RTPro Sear
Sear pin and screws included ULE milling RTP style foregrip slot. ULE milling is setup so your rail can be pump milled now or later. |